Skip to Content

Indoor/outdoor figure-8 drop cable, self-supporting, aerial access


SupplyFactory order
FreightArranged to your site

Made to order by our manufacturing partners. Samples can be arranged before a volume order.

A self-supporting flat drop cable for indoor/outdoor aerial access into buildings. The fibre unit sits in the centre with two parallel FRP or steel wire strength members either side, plus an additional steel wire strength member, all in a black or coloured LSZH sheath. An identification guide runs along the bottom of the cable.

Construction
  • 250 µm coloured fibre
  • Strength members: FRP (fibreglass-reinforced plastic) or steel wire
  • Messenger: steel wire
  • UV- and flame-resistant LSZH outer jacket
Features
  • Good UV and flame resistance
  • Bow-type flat structure
  • Compact, soft and flexible; easy to install
  • Figure-8 self-supporting design
  • Works with low-cost attachment hardware
Typical uses

Access network drops from outdoor plant into customer premises; in-building distribution, especially indoor and outdoor aerial access cabling.

Optical characteristics
Fibre TypeAttenuationOverfilled launch BandwidthEffective Modal Bandwidth10GB/S Ethernet link lengthMin Bending Radius
Conditions1310/1550nm850/1300nm850/1300nm850nm850nm
UnitdB/kmdB/kmMHZ.kmMHZ.kmmmm
G652D0.36/0.2216
G657A10.36/0.2210
G657A20.36/0.227.5
50/1253.0/1.0≥500/50030
62.2/1253.0/1.0≥200/50030
OM33.0/1.0≥1500/500≥2000≥30030
OM43.0/1.0≥3500/500≥4700≥55030
B1-OM33.0/1.0≥1500/500≥2000≥3007.5
B1-OM43.0/1.0≥3500/500≥4700≥5507.5
Mechanical specifications
Fibre CountCable Diameter
(mm)
Cable Weight
(kg/km)
Tensile Strength
(N/100mm)
Crush Resistance
(N/100mm)
Short TermLong TermShort TermLong Term
1-45.2*2.01860030022001000
6-123.0*9.02712006001100500

The cable core uses 250 µm coloured fibre. Tensile and crush values in the table apply when FRP or steel strength members are used.

Packing

Boxed and palletised.