A 1U, 19" sliding-drawer fibre patch panel supplied unloaded, with 3 removable front adaptor panels so you can fit the adaptors you need. Suits telecom networks, central office cable systems and in-building fibre networks.
Features
- 3 removable front adaptor panels with tool-free latch
- 24 ports with FC or LC simplex adaptors; up to 48 ports with LC duplex
- Takes FC, SC, LC, ST and other adaptors
- 4 cable entries at the rear
- 15 cm bolt and nut inside for fixing the splice tray
- Robust, well-sealed construction
- Pigtails are well protected inside
- Insulated core and housing
- Easy to install and work on
Typical uses
LANs and WANs; CATV networks; FTTx systems; test instruments.
Specifications
| Material | Steel and ABS plastic |
|---|---|
| Finish | Black |
| Splice trays | 1 |
| Cable entry | 4 cable entry ports |
| Adaptors | LC, FC, SC, ST and others (not supplied) |
| Operating temperature | 40℃ ~ + 60℃ |
| Standards | TIA/EIA568.C, ISO/IEC 11801, En50173, IEC60304, IEC61754, EN-297-1 |
| Bend radius | ≥40mm |
| Extra splice tray loss | None |
| Lateral pressure resistance | 500N |
| Tensile resistance | 750N |
Available accessories
- SC, LC, FC, ST simplex and LC duplex adaptors
- 12-core bundled, colour-coded FC/SC/LC/ST pigtails, 1.5 metre
- 12-core splice tray
- Heat-shrink sleeves
Example build: 24-port panel with 24 SC simplex adaptors, 2 × 12-core colour-coded SC pigtail bundles (1.5m), 2 × 12-core splice trays and 24 heat-shrink sleeves.