A double-section 19" wall-mount cabinet, 540 mm wide, for data and telecommunications equipment and its cabling. The side panels open like doors, the rear section opens from either side, and the bolted body is as strong as a welded one. Holds up to 45 kg.
Features
- Framed 5 mm tempered glass front door, fixed without glue, with a cylinder key lock and purpose-made hinge
- Hinged 100 mm rear section with a padlock; opens from either side without swapping hinges
- Side panels on spindles open like doors, released from inside the cabinet
- Top and bottom panels are interchangeable
- Front and rear sections earthed (2 earthing cables); the rear earthing cable can be detached
- Four position-adjustable 19" mounting rails (1.80 mm)
- 10 spare sets of M6 cage nuts and screws
- Cable entries: 2 × 200 × 50 mm each on top, in the base and at the rear (more on request)
Typical uses
Data cabling and network equipment in comms cupboards and offices where rear access is needed. Shown as a 540 × 600 mm, 6U cabinet.
Specifications
| Width | 540 mm |
|---|---|
| Depth | 550, 600 mm |
| Height | 4U, 6U, 9U, 12U, 15U, 18U (custom on request) |
| Material | SPCC cold-rolled steel or EG steel |
| Thickness | Mounting profile 1.8 mm; other parts 1.00–1.20 mm |
| Finish | Degreased, acid pickled, rust-proofed and phosphated, rinsed in pure water and electrostatic powder coated |
| Colour | RAL9005 (black), RAL7035 (grey), others on request |
| Protection | IP20 |
| Static load | 45 kg max |
| Standards | ANSI/EIA RS-310-D, IEC297-2, DIN41491 Part 1, DIN41494 Part 7, GB/T3047.2-92, ETSI |
| Packing | Flat-packed (saves 66% of the volume) in a plain carton |
Parts list
| NO. | Part Name | QTY | Unit | Materials | Treatment | Notes |
|---|---|---|---|---|---|---|
| 1 | Special Hinge | 1 | Set | 1.2mm SPCC cold rolled steel | Powder coating | For Front |
| 2 | Front Door | 1 | Piece | 5mm Tempered transparent glass 1.2mm SPCC cold rolled steel | Powder coating | |
| 3 | Side Door | 2 | Piece | 1.2mm SPCC cold rolled steel | Powder coating | screwed |
| 4 | Rear section | 1 | Piece | 1.2mm SPCC cold rolled steel | Powder coating | 150 mm |
| 5 | Bottom | 1 | Piece | 1.2mm SPCC cold rolled steel | Powder coating | |
| 6 | Top | 1 | Piece | 1.2mm SPCC cold rolled steel | Powder coating | |
| 7 | Mounting Profile | 4 | Piece | 1.8mm SPCC cold rolled steel | Powder coating | Can GE treated |
| 8 | Small bolt lock | 1 | Piece | – | – | Rear door |
| 9 | Small pad lock | 1 | Piece | – | – | Front door |
| 10 | Earthing Bolt | 3 | Piece | – | – | 30 cm |
| 11 | M4＆M5 cage | 20 | Set | Mn56 steel | Zinc plated | |
| 12 | M6 Screw | 20 | Set | Mn56 steel | Zinc plated | 10sets for extra |
| 13 | Common Hinge | 1 | Set | Low Carbon steel | Powder coated | For rear |