A 19" smart server cabinet with built-in environmental monitoring and an 8" LCD touch screen on the front door. It supports SNMP for remote, centralised monitoring and management, and takes loads of up to 800 kg.
Features
- Mesh front door with the 8" LCD screen and an electronic code lock
- Single or double mesh rear door with a handle lock
- Removable, lockable side panels
- Front and rear doors earthed
- Fan tray for airflow cooling
- Four position-adjustable 19" mounting rails
- Castors rated 600 kg, plus levelling feet
- 20 spare sets of M6 cage nuts and screws
- Cable entries: 1 × 400 × 50 mm on top, 4 × 350 × 50 mm in the base (more on request)
Monitoring functions
- Temperature and humidity: a built-in sensor shows readings on the LCD and alarms when limits are exceeded
- Smoke: a smoke sensor monitors for fire in real time and alarms on any fault
- Door access: an infrared sensor tracks door open/closed status, with user-configurable alarms
- Automatic lighting: infrared-triggered lights at the front and rear switch on when a door opens (optional)
- LCD touch control: the 8-inch front screen is used to set and check parameters
- Low power: the monitoring system draws no more than 30 W at the head end, more than 80% less than traditional monitoring systems
Typical uses
Data centres and computer rooms that need centralised monitoring and management.
Specifications
| Display | 8" LCD touch screen |
|---|---|
| Protocol | SNMP |
| Working voltage | DC 12 V |
| Communication | RS232/RS485, TCP/IP, MODBUS |
| Baud rate | 9600 bps |
| Monitoring power | 30 W max |
| Load capacity | Up to 800 kg |
| Compliance | CE, RoHS |
| Packing | Supplied assembled (recommended) or flat-packed, in a plain carton |
Parts list
| NO. | Item | 600W | 800W | Materials | Treatment | Notes |
|---|---|---|---|---|---|---|
| 1 | Frame | 2 | 2 | 1.5mm SPCC steel | Powder coating | |
| 2 | Front Door | 1 | 1 | 1.2mm SPCC | Powder coating | mesh door |
| 3 | Side Panel | 2 | 2 | 1.2mm SPCC steel | Powder coating | removable |
| 4 | Back Door | 1 | 1 | 1.2mm SPCC steel | Powder coating | mesh door |
| 5 | Cylinder Lock | 3 | 3 | Zinc alloy | – | back & side |
| 6 | Top cover | 1 | 1 | 1.2mm SPCC steel | Powder coating | |
| 7 | Electrical lock | 1 | 1 | Zinc alloy | Powder coating | |
| 8 | Fan unit | 1 | 1 | 1.2mm SPCC steel | Powder coating | 4 fans |
| 9 | LCD panel | 1 | 1 | LCD screen | – | |
| 10 | Bottom panel | 1 | 1 | 1.2mm SPCC steel | Powder coating | Optional parts |
| 11 | Earthing cable | 2 | 2 | Y/G cable | – | 25 cm |
| 12 | Castors & Feet | 4 | 4 | Carbon steel, PU | Powder coating | |
| 13 | Sensors | 1 | 1 | T & H detector | – | |
| 14 | Intelligent PDU | 1 | 1 | IP PDU | Powder coating | SNMP |
| 15 | Mounting angle | 6 | 6 | SPCC T=1.2 | Powder coating | |
| 16 | 19inch rails | 4 | 4 | SPCC T=2.0 | Powder coating | |
| 17 | Vertical C/M | – | 2 | SPCC T=1.2 | Powder coating | Only for 800 W |
Installation notes
- For indoor use only. Not for explosive, humid or wet environments.
- Protect from mechanical damage and improper handling, including overloading, fitting equipment that affects the cabinet's operation, and altering its construction.
- Spread the load evenly to reach the maximum rated load.
- Stand the cabinet on a flat floor and level it with the adjustable feet.
- Seal unused cable openings with a brush blanking panel or plastic frame to keep dust out (both available separately).
- All parts are recyclable; dispose of the cabinet according to local regulations.